Easy methods to run R in Visible Studio Code

For those who’re a cheerful RStudio consumer, you might by no means have had the urge to attempt one other editor for R (and even Python). However if you wish to attempt GitHub Copilot—GitHub’s new AI-based coding assistant—you’ll want to jot down your code in Microsoft’s Visible Studio Code. Up to now, GitHub Copilot is barely accessible in Microsoft’s editor—not shocking, contemplating Microsoft owns GitHub.

GitHub Copilot makes use of AI to counsel strains of code as you’re working. It isn’t optimized for R, nevertheless it nonetheless will suggest R code. David Smith, cloud advocate at Microsoft, tweeted a brief demo displaying that the GitHub Copilot beta may even counsel tidyverse code in addition to base R.

Arrange Visible Studio Code for R

Sadly, organising Visible Studio Code to work with R isn’t fairly as simple as putting in RStudio. That’s as a result of VSCode has the capability to help tons of of programming languages, significantly greater than RStudio. Providing all that functionality by default out of the field would make for a reasonably bloated piece of software program. So, VS Code is modular, and most customers have to put in extensions in an effort to optimize VS Code for his or her particular use circumstances.

For R customers, which means putting in a few extensions and tweaking a number of settings.

The 1st step, clearly, is downloading Visible Studio Code, which yow will discover on the Visible Studio Code web site. VS Code is free and accessible for Home windows, Mac, and Linux. Set up it like some other software program bundle.

Subsequent comes including R help. On the left “exercise” navigation bar in Visible Studio Code, click on the icon with the 4 squares to seek for extensions. I looked for “R language” as a result of a seek for “R” will return oodles of non-relevant outcomes. Smith advisable Yuki Ueda’s R Extension for Visible Studio Code, aka vscode-R, which provides fundamental R language help (run, snippet, viewer). It reveals up as the primary search outcome. 

Screenshot shows VSCode icon at left and a search for R language extensions with a number of results Sharon Machlis, IDG

Click the extensions icon to search for R Language extensions.

Once you click the install button, you should see a screen with information about how to configure and run the extension. This is important info.

Text explaining various features of the newly installed extension. Sharon Machlis, IDG

Once an extensions is installed, you should see a screen with details about how to optimize and use the extension.

I also read the vscode-R project’s GitHub wiki page and main GitHub page to see what else I might want to add or change to improve my R experience.

One of the first suggestions is to use the radian terminal. That’s not a VS Code extension but an application written in Python—which means your system needs Python installed in order for radian to run. I already have Python and the conda package manager installed on my Mac, so I used this installation command for radian:

conda install -c conda-forge radian

There is also a pip install command for those who use the popular Python package manager:

pip install -U radian

If you don’t have Python already installed on your system, see the video below for easy instructions on how to install Python for use with R and RStudio.

There are a couple of other recommended installations for the vscode-R extension: languageserver and vscode-r-lsp.

languageserver is a regular R package, so I can go back to RStudio or an R terminal and install it the usual way, with install.packages("languageserver").

To install vscode-r-lsp, I can either go back to my Visual Studio Code window and install it from the VS Code extensions marketplace or I can click the install button on the vscode-r-lsp web page. 

The vscode-R extension’s wiki also recommends installing two other R packages, by the way: jsonlite and rlang. I already have those on my system, but you’ll want to make sure you do, too. If you don’t, both jsonlite and rlang can be installed from CRAN with install.packages().

Tweak Visual Studio Code settings for R

The vscode-R extension instructions also said I needed to “enable config r.bracketedPaste”. That means I need to go into VS Code settings and turn that setting on if it’s not already enabled.

The easiest way to change a VS Code setting is to open up the settings user interface.  (The other option is editing the underlying settings JSON file.) To get to the settings UI, go to either File > Preferences > Settings on Windows or Code > Preferences > Settings on Mac. You can then search for “bracketedPaste” and click to enable it.

You can also get to the settings UI using Visual Studio Code’s command palette. The command palette is a handy way of accessing all sorts of VS Code capabilities by typing instead of pointing and clicking at menus. A lot of software development environments have command palettes, and they’re good to get to know. In VS Code, you can pull up the command palette either with the F1 key or the key combination Control-Shift-P on Windows or Command-Shift-P on Mac.

Screen shot shows searching for 'open settings' in the VSCode command palette. Sharon Machlis, IDG

You can use the command palette to access VS Code settings options.

Once you’ve opened the command palette, you can use it to get to VS Code settings by typing Open Settings. You should see a choice to open the graphical UI or the underlying JSON file.

The vscode-R extension’s documentation mentioned a couple of other settings to update. One was to enable R Session Watcher. The other setting I turned on was R: Always Use ActiveTerminal. This means all R code will be sent to the current, active terminal—even if it’s not an R terminal—instead of launching a new R terminal. This solved a problem I was running into on my Mac, so I enabled it. However, it means that at the start of each R session in VS Code, I need to type “radian” into the “regular” (non-R) terminal before trying to run R code.

As you can see, this is a bit more complicated to set up than the one-and-done RStudio installation. You may want to think of it as similar to first installing R, which is often followed by installing a lot of packages like tidyverse, data.table, and janitor on top of your brand new basic R installation.

Write and run R code in Visual Studio Code

The vscode-R extension instructions suggests that users open a folder when working in R, not just create a new file. You can open a folder by going to File > Add Folder to Workspace. Once you do that, you can use the “explorer” icon at the top of the left-side activity navigation bar to view available files.

One more step to set up my session if I want to run code as well as write it: I need to open a “regular” non-R terminal and then launch my radian terminal for R by typing radian. To do this, I go to the top menu and Terminal > New Terminal. Once I type radian into the terminal, a radian R terminal launches and I’m ready to go.

You can run a line of code or several lines you’ve selected by hitting Control-Enter on Windows or Command-Enter on Mac. That’s pretty similar to RStudio.

Help is a little different in VS Code than in RStudio, though. Using the help() or ? help shortcut isn’t as elegant. It looks more like Unix help—and you need to type q to quit out of it after viewing it.

Screen shot of help file information that pops up for gemo_bar upon mouse hover Sharon Machlis, IDG

Hover your mouse over a function such as ggplot2’s geom_bar() and VS Code will return help file info.

However, if you hover over a function, you’ll get some help information without having to type anything, which is pretty convenient.

The hover works for variables you define, too. (You can see how that works in the video embedded at the top of this article.)

You can preview R graphics in Visual Studio Code by running graphics code such as ggplot2 code, and the resulting graphics will pop up in a new window.

Screen shot of a color picker that pops up when mouse hovers over color hex code. Sharon Machlis, IDG

Use a color name or hex code in your R script, and VS Code will show a small box with that color. Click in the box and it turns into a color picker.

VS Code has a cool R dataviz feature: When you include a color’s name or hex code in your R code, a little box pops up showing that color—and that box also serves as a color picker. Click on it and you can pick any other color, and the new color hex code will replace the old color in your code. You can see that in action in the video above as well.

R code snippets in Visual Studio Code

One last point: I can’t use a code editor without code snippets. Snippets are stored code blocks that are easy to reuse by typing the snippet’s abbreviation. Some R snippets are included with the vscode-R extensions, but you can also create your own.

The first time I went to Code > Preferences > User Snippets and chose R, an R snippets JSON file was automatically generated. Now if I go to Code > Preferences > User Snippets, I can open that r.json snippets file and edit my old snippets or add new ones.

Here is the syntax for creating a snippet in VS Code:

"Snippet Title": {
"prefix": "what_i_type_to_trigger_snippet",
"body": [
"my R code here;",
"myfun(${1:argument_label} #example code"
"description": "Optional description for my snippet"

And below is an example of my snippet for creating a basic ggplot2 bar chart with blue bars.

"Basic bar plot blue": {
"prefix": "myg_barplot_blue",
"body": [
"ggplot(${1:mydata}, aes(x = ${2:myxcol}, y = ${3:myycol})) +",
"geom_bar(stat='identity', color = 'black', fill='#0072B2')"
"description": "Basic ggplot bar plot with blue bars outlined in black"

The dollar sign braces are variables that can be easily filled in via tabs.

RStudio has code snippets as well. Both code editors let you see available snippets when starting to type the snippet abbreviations (which is why I came up with the convention to start all my ggplot2 snippets with myg_). However, VS Code also lets you see a complete list of your snippets using the Insert Snippet command from the command palette—just hit the F1 key and then type “Insert Snippet.”

Use Visual Studio Code for R?

Visual Studio Code has some very useful features, and it might be worth using for certain code-heavy projects where the function and variable pop-ups would come in handy—or when I’m going back to coding in other languages.

I love the ability in VS Code to look at all my snippets, including titles and optional descriptions! That’s one feature I’d really like to see in RStudio.

Still, I’ll likely stick with RStudio for now, especially for R-specific tasks like R Markdown documents and Shiny apps. But that may change when I finally get access to GitHub Copilot.

For more R tips, head to the InfoWorld Do More With R page.

Copyright © 2021 IDG Communications, Inc.

Source link